I glued in some “stringers” to the floor. These are 3/4″ thick pieces of wood, that are the same thickness as the frame tubing so they will be flush. They will help support the interior floor, and will be used to attach some interior stuff to, rather than drilling and bolting everything to the frame.
I began painting the inside white with a tough latex paint. Going to be a few coats to have a nice sealed finish:
I also welded on the supports to the frame for the track fenders, as well as some tubing to help support the upper hull later. Then after some sanding of surface rust, gave it a coat of primer.
Leave a comment
No comments yet.